Industrial Supplies
- Proto Ret Ring Retaining Ring, for 3/4in Drives, 1 7/16in Groove (PTORR07523)
- Cracked sockets and worn drive tools cause each other to turn excessively in relation to each other.
- Designed with a resin crush gauge to help identify when to replace worn sockets.
- Drive tool and socket should line up when in use and should not pinch the crush gauge.
- One piece construction, no loose parts.
- Pin is made of resin which allows the material to compress without breaking.
- Retaining rings are used to help secure sockets onto drive tools.
- The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced.
- The rotational forces are between the drive tool and the socket.
- They are not intended to bear any load.
- This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced.
- Proto Ratchet-Wrench Repair Kit, 1/2 Drive, For 5449, 5449BL, 5450, 5450BL (PTO5449RK)
- Everything you need to make your wrench new again.
- Floating-pawl, 24-tooth-gear design.
- Easy-repair, two-screw system.
- Includes one ratchet assembly kit containing: one 24-tooth ratchet gear, one ratchet pawl, one ratchet-seat insert, two screws, two springs, two clips and one thumb-style reverse-direction lever.
- Proto Ret Ring Retaining Ring, for 1in Drives, 2in Groove (PTORR10032)
- Large drive size crush gauge retaining ring.
- Part numbers are embossed on the rings near the point at which the pin and ring meet.
- Proto Ratchet Repair Kit, For 5649 (PTO5649RK)
- Male drive plug featuring a spring-loaded pellet rather than a spring loaded ball.
- For PROTO® Model 5649 3/4-inch ratchet drive.
Google+
Facebook
Twitter